We offer the following services:
- Tool repairs
- Warranty repair service
- Tools, accessories, and parts sales
- Selected tool testing and certification
For more information on how to send us a tool for repair or warranty service, click here.
What We Do
We fix pneumatic and electric power tools including hammers (air/demolition), buffers, chipping hammers, door skin removers, drills (air/aircraft/hammer), engravers, erasers, gasket scrapers, grease guns, grinders (angle/die/pencil/straight), impact drivers, impact wrenches, jackhammers, nailers, scalers (chisel/needle), nibblers, pinstripe removers, polishers, ratchet wrenches, riveters, sanders, saws (including mobile table saws), sawzalls, screwdrivers, shears, staplers, tire buffers, windshield knives, battery chargers, radios, and work lights.
We also calibrate, repair, and certify torque wrenches (electronic and non-electronic).
Got questions? We've probably got your answer on our FAQ page.
Brands We Warranty
We are an authorized warranty service center for many brands. We can accept any of these to repair under warranty:
- Air Boss
- AIRCAT Pneumatic Tools
- Ascot Supply Corporation
- Astro Pneumatic
- Atlas Engineering
- Central Tools
- Chicago Pneumatic
- Cornwell Tools
- Eagle Industries
- Florida Pneumatic
- Kimball Midwest
- Mighty Seven
- Milwaukee Tools
- Myers Tire Supply
- Precision Instruments
- St. Louis Pneumatic
- Sunex Tools
- Tech International
Brands We Service
In addition to the brands we can repair under warranty, here are some of the other brands we also service:
- American Forge & Foundry
- Apex Tool Group
- ATD Tools
- AVK Industrial Products
- Black & Decker
- CDI Torque Products
- CIA International
- Cooper Tools
- Dent Fix Equipment
- Dotco Tools
- Gotham Staple
- Henry Tools
- Hilti, Inc
- Josef Kihlberg
- K&E Tools
- Kett Tool Co.
- MAC Tools
- Master Power
- MATCO Tools
- Max USA
- National Detroit
- National Electric
- Norbar Torque Tools
- POP Rivet
- Rodcraft Pneumatic
- Sioux Tools
- SK Tools
- Skill Power Tools
- SP Air USA, Inc
- Superior Pneumatic
- TC Service
- Tireman 2
- Universal Tool
- Viking Tools
- Wright Tool
- ZNEX Performance Tools
All pneumatic tools are tested under normal operating conditions using two Saylor Beall 80-Gallon 5 HP Air Compressors (CFM rating 16-30) . One compressor begins at 115 PSI and the other is used if the air lines fall below 105 PSI; the maximum line pressure is 145 PSI. The air lines are hard piped with 3/4" steel air hose.
Our impact wrench testing equipment is rated up to 2,000 ft/lbs. Impact wrenches are tested with a Skidmore Model RL power tool tester for 3/8", 1/2", and 3/4" impact wrenches and a Skidmore Model H bolt tension calibrator for 1" impact wrenches. Torque is tested by running the tools for 3.5 seconds to represent the working torque range.
A 3/8" ID whip hose is used for testing 1/2" and 3/8" impact wrenches, and a 1/2" hose is used for testing 3/4" and 1" impact wrenches.
Torque wrench service
We repair, recalibrate, and certify most makes and models of torque wrenches up to 2,000 ft./lbs. Our calibration equipment is calibrated yearly using weights and measures traceable to and complying with the National Institute of Standards and Technology (NIST).
Testing is accomplished with a CDI Suretest (for 1/4"-1" wrenches) and a Snap-on TTC400 (for 1/4"-1/2" wrenches). We also use a decibel reader, a temperature gun, contact/laser and vibration tachometers, and a battery and chargers rack during our testing.
Note: We are a warranty service center for Precision Instruments and Cornwell/Professional Tool Products electronic torque wrenches.
See repair and calibration pricing below.
We repair tools only when we feel it's cost-effective to do so: generally up to 65% of their retail cost. Because we are so confident in our assessments, we prefer that our customers pre-approve the repair, which often results in the fastest turnaround time possible. However, if you would like an estimate regardless of our assessment, please make sure your estimate request is noted when you ship your tool for service.
Learn more about how to send us a tool.
If you request an estimate and decline the repair, you will be charged a return fee of $10.00 plus any shipping costs. Determining an estimate may require disassembling the tool; if you would like your tool to be reassembled before it is returned, you will be charged $12.00 plus any shipping.
|Fee||Amount||When does it apply?|
+ shipping and taxes
|Repair declined and tool is to be returned, likely disassembled|
|Return Reassembled Fee||$12.00|
+ shipping and taxes
|Repair declined and tool is to be re-assembled prior to return|
Torque wrench service
|Pneumatic||1/4"||Repair and Calibrate||$35.00 + parts|
|Pneumatic||3/8"||Repair and Calibrate||$35.00 + parts|
|Pneumatic||1/2"||Repair and Calibrate||$35.00 + parts|
|Pneumatic||3/4"||Repair and Calibrate||$85.00 + parts|
|Electric||All sizes||Calibrate||$45.00 (includes new batteries)|
|Electric||All sizes||Repair and Calibrate||$85.00 + parts (includes new batteries)|
Calibration certification is available upon request for an additional $15.00.
Prices above do not include shipping or applicable taxes.
We accept cash, checks, credit cards, and payments through PayPal. Sensitive credit card information is not stored in our database, and all transactions through this website are encrypted and secure.